Basebox
Die cast aluminium LM6 basebox with cast lid, light tray and lamps. Supplied with lead in tubes as standard or add GF after part number for gland fitting.
2 x 8 watt |
C2/BL2/19A |
3 x 8 watt |
C2/BL2/19B |
2 x 11 watt |
C2/BL2/19C |
3 x 11 watt |
C2/BL2/19D |
LED Basebox
Die cast aluminium LM6 basebox. Supplied with sealed (IP67) LED light tray. Can be supplied as a driverless version. PEC options available. Add GF after part number for gland fitting.
Driver |
C2/BL2/16/LED |
Driver with PEC |
C2/BL2/16/LEDS |
Driverless |
C2/BL2/16/LED-LD |
Driverless with PEC |
C2/BL2/16/LEDS-LD |
Quick Release Basebox
Die cast aluminium LM6 basebox with cast two part lid secured by two tri-head bolts. Supplied with light tray and lamps. Supplied with lead in tubes as standard or add GF after part number for gland fitting.
2 x 8 watt |
C2/BL2/QR/19A |
3 x 8 watt |
C2/BL2/QR/19B |
2 x 11 watt |
C2/BL2/QR/19C |
3 x 11 watt |
C2/BL2/QR/19D |
Halo Basebox
Die cast aluminium LM6 basebox with cast lid that is designed to attach the Halo Bollard with a single fixing point. Patented light tray with cooling fans housed under a domed lens. Retro-fits into existing Haldo baseboxes.
3 x 10 watt Standard Ballast |
C6/HAL/19B |
3 x 10 watt Electronic Ballast |
C6/HAL/19D |
4 x 10 watt Standard Ballast |
C6/HAL/19F |
4 x 10 watt Electronic Ballast |
C6/HAL/19H |
24-Volt Basebox
Low voltage installation gives added safety features from RTA or Vandal Damage. Uses a Transformer to convert 230/240-volt power down to 24 volts.
2 x 11 watt - Low voltage tray |
C2/BL2/19C-LV |
3 x 11 watt - Low voltage tray |
C2/BL2/19D-LV |
3 x 11 watt - Low voltage tray - Quick Release Lid |
C2/BL2/QR/19D-LV |
Ducting Box for Bollards
Robust rotationally moulded product.
Basebox can be removed without having to 'break-out' concrete.
Holding down bolts are securely fixed in position at the factory therby eliminating any 'misalignment' problems.
Optional temporary lid available to prevent dirt ingress on-site before basebox installation.
Compatible with all Haldo Basebox configurations, i.e baselite, safelite and Halo Bollards.
Lid for Ducting Box |
D1/BBL2/2 |
Ducting box C/W fitted with 'U' Bolts |
D1/BBL2/1 |
Extension for Ducting Box |
D1/PAC2 |
Add '-DB' to existing part numbers |
e.g. C2/BL2/19A-DB |
Steel Island Site
Rigid braced structure into which any HALDO basebox and bollard can be mounted by two bolts.
Manufactured in 3mm galvanised mild steel
Mounting can be pivoted about fixing bolts to allow vertical mounting on gradients up to 1 in 6.
Sizes available: 925mm, 1225mm, 1500mm, 1800mm, 2000mm width and length
Made to order custom sizes also available.
Island Site - W & L - 925mm |
IS/0900 |
Island Site - W & L - 1225mm |
IS/1200 |
