printpdf
main features
Die cast aluminium alloy LM6 Base flanges include holes for fixing with ragbolts if required.
Cable entry through rear of basebox sealed by heat shrink sleeves, cold shrink sleeves, cable entry seal, or cold pour compounds. Gland fitting options or cable entry aperture.
Fixed lid with four stainless steel bolts or quick release lid with 2 tri head bolt fixing.
Haldo produce one size of base box which fit all locations, and bodyshells making stocking easier.You can interchange lids light trays and bodyshells according to each application.
Lifting out light tray simultaneously disconnects it both mechanically and electrically.
Specification
Options
Standard Basebox
Fixed bolt down lid, flat or domed lens, lead in tube fitting or gland fitting or cable entry seal. Choice of light trays available.
Quick Release Lid Basebox
Quick release system which operates without a hinge fixed by two tri head locks, lead in tube fitting, or gland fitting or cable entry seal. Choice of light tray available.
Standard Basebox - Lead in Tube Entry
Quick Release Lid Basebox - Lead in Tube Entry
Options
FURTHER OPTIONS AVAILABLE UPON REQUEST:
LED Version
Electronic Ballast
LIGHT TRAY PART CODES
Fixed lid with four stainless steel bolts or quick release lid with 2 tri head bolt fixing.
Haldo produce one size of base box which fit all locations, and bodyshells making stocking easier.You can interchange lids light trays and bodyshells according to each application.
Lifting out light tray simultaneously disconnects it both mechanically and electrically.
| Basebox Exploded | Quick Release Lid |
SpecificationOptions
Standard Basebox
Fixed bolt down lid, flat or domed lens, lead in tube fitting or gland fitting or cable entry seal. Choice of light trays available.
Quick Release Lid Basebox
Quick release system which operates without a hinge fixed by two tri head locks, lead in tube fitting, or gland fitting or cable entry seal. Choice of light tray available.
Standard Basebox - Lead in Tube Entry
|
C2/BL2/19A Standard basebox C/W lid flat 3mm lens & 2 x 8 watt light tray C2/BL2/19B Standard basebox C/W lid flat 3mm lens & 3 x 8 watt light tray |
C2/BL2/19C Standard basebox C/W lid flat 3mm lens & 2 x 11 watt light tray C2/BL2/19D Standard basebox C/W lid flat 3mm lens & 3 x 11 watt light tray |
|
C2/BL2/QR/19A Quick Release Lid basebox C/W lid flat 3mm lens & 2 x 8 watt light tray C2/BL2/QR/19B Quick Release Lid basebox C/W lid flat 3mm lens & 3 x 8 watt light tray |
C2/BL2/QR/19C Quick Release Lid basebox C/W lid flat 3mm lens & 2 x 11 watt light tray C2/BL2/QR/19D Quick Release Lid basebox C/W lid flat 3mm lens & 3 x 11 watt light tray |
|
Standard basebox supplied with two lead in tubes for heat shrink sleeves. Add suffix GF if two knockout holes only required for gland fitting. Add suffix CE if aperture through which cut out can pass, if required. Add suffix S if P E C required on light tray. |
Add suffix 5 if 5mm lens required in lid. Add suffix DL if domed lens required in lid. Baseboxes are supplied inclusive of lamps. All light trays have two separately fused circuits. |
FURTHER OPTIONS AVAILABLE UPON REQUEST:
LED Version
Electronic Ballast
LIGHT TRAY PART CODES
|
C2/BL2/16A C2/BL2/16B C2/BL2/16C C2/BL2/16D |
Light tray ( 2 x 8 watt) Light tray ( 3 x 8 watt) Light tray ( 2 x 11 watt) Light tray ( 3 x 11 watt) |
