printpdf
main features
Robust rotationally moulded product.
Holding down bolts are securely fixed in position at the factory thereby eliminating any ‘misalignment’ problems.This ensures that the basebox will drop straight into the ducting box.
Optional temporary lid prevents dirt ingress into the ducting box if the bollard is not to be installed until a later date. Ø64mm and Ø108mm trepans are provided on all four sides for straightforward attachment of duct. Provision for height adjustment to allow for sites where the final ‘ground-line’ height may not be known.
Compatible with all Haldo Basebox configurations, i.e. baselite, safelite and Halo Bollards.
main features
Robust rotationally moulded product.
Holding down bolts are securely fixed in position at the factory thereby eliminating any ‘misalignment’ problems.This ensures that the basebox will drop straight into the ducting box.
Optional temporary lid prevents dirt ingress into the ducting box if the bollard is not to be installed until a later date. Ø64mm and Ø108mm trepans are provided on all four sides for straightforward attachment of duct. Provision for height adjustment to allow for sites where the final ‘ground-line’ height may not be known.
Compatible with all Haldo Basebox configurations, i.e. baselite, safelite and Halo Bollards.
Groundwork can be completed by one contractor, and the bollard itself can be installed at a later date by a different contractor (i.e. electrician). Basebox can be removed without having to ‘break-out’ concrete.
| Reflex Bollard | Installation |
Specification
Rotationally moulded MDP, black ducting box for bollard installation.
Duct entry is effected by cutting around the appropriate size of pre-trepanned profile. Ø64mm and Ø108mm trepans are provided on all four sides of ducting box.
This product has been designed to be compatible with all Haldo base illuminated bollards.
Standard bolt down lid. Part number:
|
C2/BL2/19A-DB C2/BL2/19B-DB C2/BL2/19C-DB C2/BL2/19D-DB |
2 x 8 watt 3 x 8 watt 2 x 11 watt 3 x 11 watt |
Quick Release Lid. Part number:
|
C2/BL2/QR/19A-DB C2/BL2/QR/19B-DB C2/BL2/QR/19C-DB C2/BL2/QR/19D-DB |
2 x 8 watt 3 x 8 watt 2 x 11 watt 3 x 11 watt |
Halo Bollard. Part number:
|
C6/HAL/19B-DB C6/HAL/19D-DB |
3x10 watt standard ballast 3x10 watt electronic ballast |
Figure 1. - Lid for ducting box.
Part number D1/BBL2/2.
Figure 2. - Haldo Basebox predrilled for ducting box.
Figure 3. - Ducting box c/w fitted with ‘U’ Bolts.
Part number D1/BBL2/1.
Figure 4. - Extension for Ducting Box.
Part number D1/PAC2.
