printpdf
features
The Stern bench is available in a brushed 316 stainless steel finish.
As standard it is hot dipped galvanised and finished in any RAL colour.
The bench is anchored in the ground with added stability from 2 steel plates positioned 40cm below ground level.
colour
The benches can be finished in any RAL-colour.
technical infomation
The seating and backrest are made of 10mm steel rod welded to four x 4mm thick steel brackets. The brackets are welded to supporting-beams of 48mm tube. The supporting-beams are welded to two stands of 48mm diameter.
The anchorage in the ground and stability are possible due to two steelplates which are welded to the stands at 40cm under groundlevel. The handrails are made of flat steel 50 x 4mm.
The complete bench is hot dipped galvanised and finished in any RAL-colour.
measurements
The supporting-construction is made of 48mm tubes and the steel rod of the seat and backrest is 10mm. The outer width of the bench is 1500mm.
The height at the front of the seat is 450mm above groundlevel. The total from groundlevel to the top of the backrest is 820mm.
features
The Stern bench is available in a brushed 316 stainless steel finish.
As standard it is hot dipped galvanised and finished in any RAL colour.
The bench is anchored in the ground with added stability from 2 steel plates positioned 40cm below ground level.
colour
The benches can be finished in any RAL-colour.
technical infomation
The seating and backrest are made of 10mm steel rod welded to four x 4mm thick steel brackets. The brackets are welded to supporting-beams of 48mm tube. The supporting-beams are welded to two stands of 48mm diameter.
The anchorage in the ground and stability are possible due to two steelplates which are welded to the stands at 40cm under groundlevel. The handrails are made of flat steel 50 x 4mm.
The complete bench is hot dipped galvanised and finished in any RAL-colour.
measurements
The supporting-construction is made of 48mm tubes and the steel rod of the seat and backrest is 10mm. The outer width of the bench is 1500mm.
The height at the front of the seat is 450mm above groundlevel. The total from groundlevel to the top of the backrest is 820mm.
