printpdf
features
Available in 2 versions, steel or wood.
Lotus steel park bench with aluminium sideframes, can be finished in any RAL colour.
Lotus wood park bench with aluminium sideframes, can be finished in any RAL colour.
The wooden seating is available in a choice of wood finishes also in any RAL colour.
colour
The steel bench has aluminium sideframes that can be finished in any RAL-colour. The steel mesh seating and backrest as well as the tubular profile 35 mm. and the two 42.4mm tubes can also be finished in any RAL-colour.
The wooden bench has aluminium sideframes that can be finished in any RAL-colour. The wooden seating and backrest are available in the following options:
The wooden parts can also be supplied in any RAL-colour.
technical infomation
The steel and wood bench sideframes are made of cast aluminium. The frames are supplied with 10 cm. long legs which can be fastened to concrete blocks, measures 30 x 30 x 20 cm.
The frames can also be delivered without the extra legs, so you can fasten the bench to any kind of pavement, with the supplementary clamps.
Seating and backrest for the steel bench are made of steel netting from 4mm and 6mm wire. The wire mesh width is 50 x 20 mm. The sideframes are connected by a tubular profile 35 x 3 mm. and two tubes ø 42,4 mm.
The wood bench seating and backrest can be deliverd in Pine-wood, Iroko, Kambala or Robinia. Lotus can also be delivered with a steel mesh seating and backrest.
measurements
Both benches cast aluminium sideframes are 4 mm. thick. The outer width of the bench is 187,5 cm. The height at the front of the seat is 45 cm. above groundlevel. The total height from groundlevel to the top of the backrest is 80 cm.
The wood bench seating and backrest are both made from four parts 100 x 35mm x 35mm.
features
Available in 2 versions, steel or wood.
Lotus steel park bench with aluminium sideframes, can be finished in any RAL colour.
Lotus wood park bench with aluminium sideframes, can be finished in any RAL colour.
The wooden seating is available in a choice of wood finishes also in any RAL colour.
colour
The steel bench has aluminium sideframes that can be finished in any RAL-colour. The steel mesh seating and backrest as well as the tubular profile 35 mm. and the two 42.4mm tubes can also be finished in any RAL-colour.
The wooden bench has aluminium sideframes that can be finished in any RAL-colour. The wooden seating and backrest are available in the following options:
| Pine-wood | impregnated |
| Iroko | impregnated |
| Kambala | 2x clear varnish |
| Laminated Robinia | 2x clear varnish |
The wooden parts can also be supplied in any RAL-colour.
technical infomation
The steel and wood bench sideframes are made of cast aluminium. The frames are supplied with 10 cm. long legs which can be fastened to concrete blocks, measures 30 x 30 x 20 cm.
The frames can also be delivered without the extra legs, so you can fasten the bench to any kind of pavement, with the supplementary clamps.
Seating and backrest for the steel bench are made of steel netting from 4mm and 6mm wire. The wire mesh width is 50 x 20 mm. The sideframes are connected by a tubular profile 35 x 3 mm. and two tubes ø 42,4 mm.
The wood bench seating and backrest can be deliverd in Pine-wood, Iroko, Kambala or Robinia. Lotus can also be delivered with a steel mesh seating and backrest.
measurements
Both benches cast aluminium sideframes are 4 mm. thick. The outer width of the bench is 187,5 cm. The height at the front of the seat is 45 cm. above groundlevel. The total height from groundlevel to the top of the backrest is 80 cm.
The wood bench seating and backrest are both made from four parts 100 x 35mm x 35mm.
