printpdf
Shelter Model 3100
features
A very traditional cycle shelter used extensively at school and college sites, stations and larger sized sites.
Easy low maintenance units available in a choice of material construction.
The increments are available in lengths of 3.30m with or without fascia panels and with a choice of roof construction.
The simplicity of this unit makes it an ideal choice for many installations.
colour
This style of shelter is available in the following options:
Model 3100 – with open lath-work (single units)
Model 3100 – with coated steel sheet pile wall profiles.
Model 3102 – with open lath-work (double units)
technical infomation
The steel cylinder profiles of the rafters and girders are hot dipped galvanised.
The gutters and drains are fabricated from PVC. Standard on the double design shelter.
The roof construction is available in the following options:
Corrugated Polyester with aluminum butt straps to prevent storm damage*
Steel corrugated iron with PVC coating.
Steel sheet pile wall with PVC coating.
Corrugated fibrecement.
The wall construction is available in the following options:
Corrugated Polyester.
Meranti open lath-work*
Steel sheet pile wall profiles with PVC coating.
The fascia board options are as follows:
Meranti groove panels*
Trespa fascia panels
No fascia panels
*Standard
measurements
The increments are available in lengths of 3.3m
Shelter Model 3100
features
A very traditional cycle shelter used extensively at school and college sites, stations and larger sized sites.
Easy low maintenance units available in a choice of material construction.
The increments are available in lengths of 3.30m with or without fascia panels and with a choice of roof construction.
The simplicity of this unit makes it an ideal choice for many installations.
colour
This style of shelter is available in the following options:
Model 3100 – with open lath-work (single units)
Model 3100 – with coated steel sheet pile wall profiles.
Model 3102 – with open lath-work (double units)
technical infomation
The steel cylinder profiles of the rafters and girders are hot dipped galvanised.
The gutters and drains are fabricated from PVC. Standard on the double design shelter.
The roof construction is available in the following options:
Corrugated Polyester with aluminum butt straps to prevent storm damage*
Steel corrugated iron with PVC coating.
Steel sheet pile wall with PVC coating.
Corrugated fibrecement.
The wall construction is available in the following options:
Corrugated Polyester.
Meranti open lath-work*
Steel sheet pile wall profiles with PVC coating.
The fascia board options are as follows:
Meranti groove panels*
Trespa fascia panels
No fascia panels
*Standard
measurements
The increments are available in lengths of 3.3m
