printpdf
The Halo retro-reflective self righting bollard making sense of good ideas.
main features
Innovative circular stem gives all round flexibilty. Available as a 270mm high intensity class 2 retro-reflective signface option.
Slimline profile gives a maximum visibility to motorists of pedestrians.
Single fixing point to allow for orientation of the signface at any point. The single point simplifies fixing or detachment.
The Halo retro-reflective self righting bollard making sense of good ideas.
main features
Innovative circular stem gives all round flexibilty. Available as a 270mm high intensity class 2 retro-reflective signface option.
Slimline profile gives a maximum visibility to motorists of pedestrians.
Single fixing point to allow for orientation of the signface at any point. The single point simplifies fixing or detachment.
The bodyshell is secured to the base by a stainless steel band, this hidden fixing point makes it almost imposible for the untrained person (vandal) to remove once positioned.
The bodyshell can be retro-fitted onto an existing Basebox or mounted directly to a pre-cast centre island splitter. Simple fixing to most flat concrete surfaces using raw or foundation securing bolts.
Four high intensity Class 2 retro-reflective bands provide the motorist maximum visibility from any angle.
Rotationally moulded from tough MDPE & EVA U.V. stabilised polymers.
The head and stem joint is a unique patented bond.
Provides a highly visible marker and direction indicator.
Designed to comply with the BS EN 8442 and BS 873 part 3.
*Guaranteed against fading for 5 years.
The bodyshell can be retro-fitted onto an existing Basebox or mounted directly to a pre-cast centre island splitter. Simple fixing to most flat concrete surfaces using raw or foundation securing bolts.
Four high intensity Class 2 retro-reflective bands provide the motorist maximum visibility from any angle.
Rotationally moulded from tough MDPE & EVA U.V. stabilised polymers.
The head and stem joint is a unique patented bond.
Provides a highly visible marker and direction indicator.
Designed to comply with the BS EN 8442 and BS 873 part 3.
*Guaranteed against fading for 5 years.
| All round Flexibility | Halo Non-Illumina on-site in Kent |
specification
Head and stem
Rotationally moulded U.V. stabilised polymers. The head and stem joint is a unique patented bond. Signfaces and stem are integrally moulded.
Dimensions
Signface 270mm - Height 920mm - Base 500mm
Head & Stem Part Numbers
Bodyshell - C4/HAL270YS/11
Mounting Frame - C4/HAL/14
To order select the DTp diagram number for the signface from the range below (fig.2) and specify in brackets after the part number e.g. C6/HAL270/11(610L) - Halo bodyshell single aspect with keep left arrow
