printpdf

main features
Vandal resistant
Flush fitting doors
Root mounted (with option of ground spades for 44, 64, 66)
Radiused corners eliminates sharp edges
Fabricated from 3mm mild sheet steel
Hot dipped galvanised finish to BS EN ISO 1461

locks
Secured by 2 stainless steel tri-head screws.
Extra centre lock can be added to 149, 189 & 3012.

internal
Fitted with back board made from 12 mm external grade plywood.
Stainless steel earth terminal and earth strap between cabinate and door.

finish
Galvanised & painted Grey to RAL 7031, also texture painted Black or Green to BS 4800 14C 39. Optional duarable PPA finish guarenteed for 15 years that doesn’t require galvanising.

options
Quotations for other RAL numbers upon request.
Available pre-wired if requested.

standard pillar range dimensions

PART NUMBER	E1/HDP/44	E1/HDP/64	E1/HDP/66	E1/HDP/146	E1/HDP/189	E1/HDP/3012	E1/HDP/3012H
Height above ground	706	706	706	950	950	950	1150
Width (internal)	100	150	150	350	450	750	750
Depth (internal)	100	100	150	150	230	300	300
Root	300	300	300	300	300	300	300
*Ground Spade	100x100x150	100x100x150	100x100x150	n/a	n/a	n/a	n/a
Door aperture	90x500	140x500	140x500	340x680	440x680	740x680	740x680
Backboard	80x486	130x486	130x486	330x700	430x700	710x710	710x900
*Side Backboards	n/a	n/a	n/a	80x700	160x700	200x700	200x900
Cable entry	100x220	150x220	150x220	244 wide	344 wide	644 wide	644 wide
Add to Part No.	G-galvanised P-Plastic coated	G-galvanised P-Plastic coated	G-galvanised P-Plastic coated	G-ONLY	G-ONLY	G-ONLY	G-ONLY

*Optional Extras

E1 Pillar 66

E1 Pillar 189